Aviom A-16II Aviom A-16II Aviom A-16II

Purchased Together with This Item
Aviom A-16CS
Aviom A-16CS
Middle Atlantic ISO-KOP
Middle Atlantic ISO-KOP
Lexicon Lambda
Lexicon Lambda
Middle Atlantic JDC-12X18
Middle Atlantic JDC-12X18
Aviom MT-1
Aviom MT-1
Aviom A-16R
Aviom A-16R
Aviom EB-1
Aviom EB-1
Lexicon Omega
Lexicon Omega
Lexicon Alpha
Lexicon Alpha

Product Information
Overview The A-16II Personal Mixer is a 16-channel stereo digital mixer designed to allow performers to create custom monitor mixes on stage or in the studio. The stereo output on the A-16II can drive in-ear monitors (IEMs) or headphones. Its intuitive interface lets a performer quickly modify a mix without distracting from the primary job at hand-performing live or in the studio.

A-16II mixers are known as the industry standard worldwide, and for good reasons: they're robust, simple to use, and sound great. Just connect an A-16II to an analog input module or digital console card to start a system. It's that easy.

Designed for use in live performance or in the studio, the A-16II Personal Mixer gives each performer control over channel volume, grouping, pan, stereo spread, as well as master volume and tone. Every Personal Mixer in a system can create a unique monitor mix for a performer. Users can save and recall up to sixteen custom mixes as presets in their Personal Mixer.

Stereo Output for Wired or Wireless IEMs
The TRS stereo output from the A-16II can be used to drive wired or wireless in-ear monitors (IEMs), headphones, powered floor wedges, an amplifier, or spot monitors.

The A-16II Personal Mixer is fully compatible with all Pro16 Series products, including Aviom's Y1 A-Net card for Yamaha digital mixing consoles. Support for the industry standard Aviom monitor mixing is available in the form of console interface cards from an ever- increasing list of digital console manufacturers (including Avid (Digidesign), DiGiCo, Soundcraft, Innovason, Tascam). Many other digital console manufacturers offer a Pro16 A-Net output option.

Power Over Cat-5
Personal Mixers can be daisy chained or connected in parallel using an A-Net Distributor. Parallel connections also allow DC power to be supplied to the mixers over the Cat-5e cable. The A-16II supports Cat-5e cable runs of up to 500 feet (150 meters) between devices, and there is no practiacal limit to the number of personal mixers in a system.

Note: The A-16II Personal Mixer does not ship with a power supply since most system configurations include an A-Net Distributor. Order the PS-120 if you need an external power supply.

Compatibility
All Pro16 Personal Mixers, including the A-16II, A-16R, and A360, can be used in any combination when creating a personal mixing system.

Adding an ASI A-Net Systems Interface to a Pro64 network allows a Personal Mixer to output any 16 channels from a Pro64 digital snake or audio network.
Features
  • 16-channel stereo mixer with fully adjustable pan per channel
  • Sixteen Preset locations for storing custom mixes
  • Channel solo, mute, and group functions
  • Intuitive interface with no menus or screens to navigate
Specifications
  • Audio Output: 1/4-inch TRS stereo, headphone or line level
  • Line/Headphone TRS Output: Tip: Audio Left; Ring: Audio Right; Sleeve: Ground
  • Auto-detects mono plugs
  • A-Net Input/Output: 1 A-Net input, 1 A-Net output; Category 5 (RJ45 connector)
  • Digital to Analog Conversion Bit Depth: 24 bit
  • Signal to Noise Ratio: (Referenced to 0dB) -103dB
  • Latency: <0.880 msec (measured from analog input to analog output)
  • Pro16 A-Net: Uses unshielded Cat-5e UTP (or better) cable; maximum 500ft (150m) between devices
  • Tone Controls: Treble +/-12dB at 9kHz shelving
  • Bass +/-12dB at 160Hz shelving
  • Maximum Levels (RMS): Line/Headphone outs: 1.0 watt at 100 ohms
  • Impedance: Line/Headphone outs: 32 ohms
  • Power Supply: External, DC, universal switching type
  • Input Voltage: 100-240 volts, 50/60Hz, 30VA
  • Output Voltage: 18-24 VDC, 0.5 amp
  • Plug Size: 2 mm
  • Dimensions: 10.75" (273 mm) wide x 5.6" (142.2 mm) deep; 2.25" (57.5 mm) high
  • Weight: 3.4 lb (1.54 kg)
  • Options:
    MT-1 or MT-1a Mic Stand Mount (uses 6-32 1/4-inch screws)
    EB-1 Extension Bracket
    MT-X Expansion Box
    PS-120 Power Supply
Documents
Brand Aviom
Model A-16II
Part Number A-16II
Product Category Audio Routing & Distribution
Unit of Measure EACH
Weight 3.40 lbs.
Aviom Performance Audio is an authorized Aviom dealer.
Aviom designs and builds a line of high quality professional audio products. All of our products are designed and manufactured in the US. Aviom products provide innovative solutions to problems found in audio systems in a variety of environments. Some of these include live sound reinforcement, audio recording studios, houses of worship, broadcast facilities, post-production, and commercial installations.
Previous Aviom product
<< Aviom A-16D Pro
Next Aviom product
Aviom A-16R >>
Brands Aviom A-16II Pin This on Pinterest