Audio-Technica BP896-TH
MicroPoint Subminiature Omnidirectional Condenser Lavalier Microphone - Beige
Based on 0 reviews.
UPC # 042005158836
Retail Price $479.00
Performance Audio Savings -$130.00
Free Shipping (Over $49) $0.00
shadow
Your Price $349.00

Add to Wishlist | Request a Quote
With a capsule diameter not much bigger than the head of a pin, Audio-Technica's smallest-ever lavalier microphone virtually disappears in props or clothing to create highest-quality audio for broadcast and theater sound reinforcement.

The BP896-TH MicroPoint omnidirectional lavalier delivers extremely intelligible natural audio and handles high sound pressure levels with ease. Its subminiature omni element is enclosed in a durable housing designed to minimize noise from handling, clothing and wind. Flip a switch to eliminate low-frequency hum without affecting intelligibility.

Offered in wired & wireless models, the BP896-TH comes generously equipped with an extensive accessory kit-mic holders, windscreens, element covers & more.

Features:

  • Inconspicuous, lightweight capsule

  • Extremely intelligible natural audio

  • Handles high sound pressure levels with ease

  • Rugged built for long-lasting performance

  • High-pass UniSteep filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality

  • Requires 11V to 52V DC phantom power

  • Includes generous accessory kit & protective case

  • RoHS compliant-free from all substances specified in the EU directive on hazardous substances

  • Available in black and beige, wired and wireless models:

  • BP896 - includes AT8539 power module

  • BP896-TH - same as BP896, but in "theater" color (beige)

  • BP896c - less power module; 1.4 m (55") cable, unterminated

  • BP896c-TH - same as BP896c, but in "theater" color (beige)

  • BP896cW - less power module; 1.4 m (55") cable terminated with locking 4-pin connector for A-T UniPak wireless systems

  • BP896cW-TH - same as BP896cW, but in "theater" color (beige)

  • BP896cL4 - less power module; 1.4 m (55") cable terminated for Sennheiser wireless systems using Lemo connector

  • BP896cL4-TH - same as BP896cL4, but in "theater" color (beige)

  • BP896cLM3 - less power module; 1.4 m (55") cable terminated for Sennheiser wireless systems using locking 3.5 mm connector

  • BP896cLM3-TH - same as BP896cLM3, but in "theater" color (beige)

  • BP896cT4 - less power module; 1.4 m (55") cable terminated with TA4F connector for Shure wireless systems

  • BP896cT4-TH - same as BP896cT4, but in "theater" color (beige)

  • BP896cT5 - less power module; 1.4 m (55") cable terminated with TA5F connector for Lectrosonics wireless systems

  • BP896cT5-TH - same as BP896cT5, but in "theater" color (beige)


Specifications:

  • ELEMENT: Fixed-charge back plate, permanently polarized condenser

  • POLAR PATTERN: Omnidirectional

  • FREQUENCY RESPONSE: 20-20,000 Hz

  • LOW FREQUENCY ROLL-OFF: 80 Hz, 18 dB/octave (wired only)

  • OPEN CIRCUIT SENSITIVITY: -49 dB (3.5 mV) re 1V at 1 Pa

  • IMPEDANCE: 250 ohms (wired only)

  • MAXIMUM INPUT SOUND LEVEL: 135 dB SPL, 1 kHz at 3% T.H.D.

  • DYNAMIC RANGE (TYPICAL): 104 dB, 1 kHz at Max SPL (wired only)

  • SIGNAL-TO-NOISE RATIO: 63 dB, 1 kHz at 1 Pa

  • PHANTOM POWER REQUIREMENTS: 11-52V DC, 2 mA typical (wired only)

  • SWITCH: Flat, roll-off (wired only)

  • WEIGHT (MICROPHONE): 0.14 g (0.005 oz)

  • WEIGHT (POWER MODULE): 85 g (3.0 oz) (wired only)

  • DIMENSIONS (MICROPHONE): 10.8 mm (0.43") long, 2.6 mm (0.10") diameter

  • DIMENSIONS (POWER MODULE): 97.6 mm (3.84") long, 18.9 mm (0.74") diameter (wired only)

  • OUTPUT CONNECTOR (POWER MODULE): Integral 3-pin XLRM-type

  • CABLE: 1.4 m (55") long (permanently attached to microphone), 1.6 mm (0.06") diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)

  • ACCESSORIES FURNISHED:BP896: AT8539 power module (wired only); two AT8157 windscreens; six element covers (2 white, 2 beige, 2 black); viper clip base; clothing clip base; 3 black single mic holders; 2 black double mic holders; belt clip (wired only); carrying caseBP896-TH: AT8539 power module (wired only); two AT8157-TH windscreens; six element covers (2 white, 2 beige, 2 black); viper clip base; clothing clip base; 3 beige single mic holders; 2 beige double mic holders; belt clip (wired only); carrying case

Based on 0 reviews.
Write a review of the Audio-Technica BP896-TH
Review Guidelines

✓ Explain why you like or dislike the product, focusing your comments on the product's features & functionality and your own experience using the product.

✓ Avoid single-word reviews, bad language, contact information (email addresses, phone numbers, etc.), URLs, time-sensitive material or alternative ordering information.

✓ Avoid comments about non-product related issues such as service and support, resellers, shipping, sales policies, or topics not directly related to the product's features or functionality.

✓ Your review should be approved within a few business days.

✓ We reserve the right not to post any review that does not meet these guidelines.

 Title of the review(please limit to 10 words)

Rate this product(your overall rating of this product)

Body of the review

Your Name(nicknames are fine)

Your Email(will not be displayed with the review)

Brands Audio-Technica BP896-TH Pin This on Pinterest