Audio-Technica ATW-R250-T2 Audio-Technica ATW-R250-T2


Product Information
Overview Audio-Technica's Freeway 200 Series Wireless Systems are designed to provide reliable performance, easy setup and clear, natural sound quality. Available in handheld, headworn, guitar, lavalier and body-pack configurations, the 200 Series Freeway Wireless Systems are single-channel, fixed-frequency systems available in three VHF frequencies (169.505, 170.245, and 171.905 MHz).

Each 200 Series Freeway Wireless System includes the ATW-R250 receiver and either a body-pack transmitter or handheld microphone/ transmitter. The ATW-R250 is a non-diversity, single-channel receiver with advanced dipole antenna design for extended operating range, which improves operation by providing a ground element in addition to the usual signal element. The ATW-R250 also offers volume control along with AF Peak, RF and Power indicator lights.
Features
  • Easy operation and clear, natural sound quality
  • Reliable performance and durable construction
  • Advanced dipole antenna system for extended operating range
  • Power, RF, and AF Peak indicators
  • Volume control, 1/4" output jack and space-saving power supply
  • Rugged unidirectional dynamic element on handheld microphone/transmitter
  • Variable microphone trim control and easily accessible On/Standby/Off switch on transmitters
  • Professional locking connector on UniPak body-pack transmitter
  • Available in 7 system configurations
Specifications
  • OVERALL SYSTEM SPECIFICATIONS
  • Operating Frequency: VHF high band, 169 MHz to 172 MHz
  • Number of Channels: Fixed channel
  • Frequency Stability: +/-0.005%
  • Modulation Mode: FM
  • Maximum Deviation: +/-15 kHz
  • Operating Range: 200' typical
  • Operating Temperature Range: 40 F (4 C) to 110 F (43 C)
  • Frequency Response: 80 Hz to 13 kHz
  • RECEIVER SPECIFICATIONS
  • Receiving System: Non-diversity, single-channel, dual antenna system
  • Image Rejection: 50 dB minimum
  • Signal-to-noise Ratio: 80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz
  • Total Harmonic Distortion: <=1% (10 kHz deviation at 1 kHz)
  • Sensitivity: 20 dBV for 60 dB S/N (IEC-weighted)
  • Audio Output: 350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load)
  • Output Connector: 1/4" TS ("mono") phone jack
  • Power Supply: 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply
  • Dimensions: 7.48" (190.0 mm) W x
  • 1.65" (42.0 mm) H x
  • 5.12" (130.0 mm) D
  • Net Weight: 11.0 oz (311 g)
  • Accessory Included: Power supply
Brand Audio-Technica
Model ATW-R250-T2
Part Number ATW-R250-T2
UPC 042005149148
Product Category Wireless Receivers
Unit of Measure EACH
Weight 1.40 lbs.
Audio-Technica Performance Audio is an authorized Audio-Technica dealer.
From a beginning in state-of-the-art phono cartridges, Audio-Technica has expanded over the years into high-performance headphones, microphones, mixers and electronic products for home and professional use. In each new area the goal has been to create innovative, problem-solving products
Brands Audio-Technica ATW-R250-T2 Pin This on Pinterest