Connecting and controlling an
audio processor for networked systems has now been simplified with Ashly's NE-Series Protea ne24.24M
digital signal processor. This Network Enabled (NE) processor offers ease of use, setup and control using standard 10/100
Ethernet protocol and Protea NE Software. No special outboard control units are needed.
The ne24.24M Matrix Processor uses modular expansion cards to provide up to twenty-four channels of
audio matrixing and processing. The base unit offers a four-input/four-output configuration. Each input and output expansion card has an individual
DSP processor allowing you to expand the base unit's total inputs or outputs four channels at a time. These cards are easily iinstalled in the field without the need to reprogram the device.
Matrixing allows you to route any input to any output and control individual levels once they have been assigned. Fixed path architecture and extensive processing power per
channel will reduce the amount of time it takes to set up your system. All programming is accomplished using Ashly's Protea NE Software on a PC platform. No front panel controls and multi-
level software security assures you a tamperproof
audio system. Input
channel processing blocks include
Mic Preamp with
Phantom Power,
Gain,
Delay, fifteen
EQ Filters,
Gate, Autoleveler and
Ducker. Inputs may be configured as either
mic or
line level. Output
channel processing blocks consist of a Cross Point
Mixer, HPF/LPF,
Delay, fifteen
EQ Filters,
Gain and
Limiter. The cross point
mixer in the output section allows you to route any input to any output at any
level and
mute any input at any output without affecting the true input configuration. The HPF/LPF block offers Bessel, Butterworth and
Linkwitz-Riley filters with 12, 18, 24 and 48dB/
octave slopes.
Whether you are designing or installing a system for corporate boardrooms, restaurants, courtrooms, houses of worship, left/center/right theatres, auditoriums or conference centers, the Protea ne24.24M will more than satisfy your requirements for any zoned system requiring
input/output matrixing with signal processing.
Features:
- 10/100 Ethernet and RS-232 computer interface Is standard
- Extensive DSP Available
- Easy and intuitive user interface
- Mic/Line inputs
- 24-bit A/D-D/A audio resolution
- 24-bit/150 MHz DSPs
- Up to 24 channels of audio processing
- 4x4 base unit configuration
- Expand inputs or outputs 4 channels per module
- Modules easily field installable
- Euroblock connectors for audio, preset recall, DC remote level and data
- 31 preset locations
- Four dedicated remote controls for Level, Preset Recall and Programmable Functions
- Third Party Control Friendly
- Input and output metering viewable in dBu
- Multi-level Security
- Five year warranty
- Safety/Compliance: (cTUVus, FCC, CE pending), RoHS
- Rear panel:
- 10/100 Ethernet port
- RS-232 Port
- Euroblock inputs
- Euroblock outputs
- Remote level control
- Preset Recall
- Data in and out ports
- Accessories
- Four Channel Input Module
- Four Channel Output Module
- WR-1 2-ch Level Control
- WR-2 Four Position Switch
- WR-5 Programmable Selector
- RD/RW8 8-ch Level Control